Features/Benefits
• Minimizes leakage with excellent compatibility with elastomeric systems components.
• Long service life with resistance to oxidation and corrosion
• High temperature stability
• Low termperature fluidity
• Minimum dry boiling point > 401°F
• Minimum wet boiing pint >284°F
Available In
• 24×8.5 Fl Oz (200 ml) BF-117
• 24×12 Fl Oz (354 ml) BF-354
• 24×16 Fl Oz (500 ml) BF-500
• Available in 1, 5, 55 gallon sizes
• Plastic Bottle or Metal Can
• Also available in DOT 4 Grade
Recommendations/Specifications
• Meets or exceeds Federal Motor Vehicle Safety Standard (FMVSS) No. 516.116, ISO 4925, SAE J-1703
Applications
Recommended for use in the hydraulic brake systems of any motor vehicle where:
• DOT 3 Hydraulic brake fluid requirements are specified
• Brake fluid standard SAE J-1703 requirements are specified
• Federal motor vehicle safety standards No. 116 requirements are specified
Directions
• Clean and remove filler cap on master cylinder.
• Fill master cylinder unit to specified level recommended by manufacturer.
• Replace filler cap.
• If system bleeding is required, refer to service manual.
Caution
• Wash cylinders and parts with recommended brake parts cleaner.
• Do Not use gasoline or kerosene.
• Avoid Brake fluid contact with brake lining or car finish.
• Follow vehicle manufacturer’s recommendations when adding brake fluid
• Keep brake fluid clean and dry.
• Contamination with petroleum products, dirt, water, or other materials may result in brake failure.
• Keep container clean and tightly closed to prevent absorption of moisture.
• Do Not reuse container for other liquids
• KEEP OUT OF REACH OF CHILDREN